2-7
Figure 2-8
Omni antenna for the NSQ1WLAN0 module
For how to connect the antenna for the NSQ1WLAN0 module, refer to “Connecting an antenna for the
NSQ1WLAN0 module” in Chapter 4 “Installing the U200 Series Device.”
Arranging Slots and Naming Interfaces
Slot Arrangement
The U200 series support interfaces such as console, AUX, Gigabit Ethernet, and WLAN interfaces. This
section describes how these interfaces are numbered.
Naming Interfaces
The interfaces on a U200 series device are named following these conventions:
1) An interface is named in the form of
interface-type X/Y
, where
z
interface-type
represents the type of the interface, such as GigabitEthernet.
z
X
represents the number of the slot in which the interface module is inserted.
z
Y
represents the number of the interface on the interface module.
2) The interfaces on the same interface module uses the same slot number
X
.
3) The interfaces of the same type on an interface module are numbered starting with 0 for
Y
from left
to right.
Examples
1) The five fixed GigabitEthernet interfaces on the U200-S are named as follows:
z
GigabitEthernet 0/0
z
GigabitEthernet 0/1
z
GigabitEthernet 0/2
z
GigabitEthernet 0/3
z
GigabitEthernet 0/4
2) If a 2GE module is installed on the U200-S, the GigabitEthernet interfaces on the 2GE module are
numbered as follows:
z
GigabitEthernet 1/0
z
GigabitEthernet 1/1
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...