7-5
Figure 7-9
Install a blank panel
Installing and Removing a Mini Card
Installing a Mini Card
Follow these steps to install a mini card, taking the 2GE card for example:
Step1
Power off the device.
Step2
Remove the blank panel from the interface card slot at the rear of the device. For how to remove a blank
panel, refer to the “Removing a Blank Panel” section on page 7-4.
Step3
Gently push the card into the slot along the guide rails.
Figure 7-10
Install a mini card
Step4
Fasten the captive screws on the card with a flat-blade screwdriver.
Figure 7-11
Fix the mini card
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...