![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781088.webp)
6-23
Table 6-10
Description on display information for update and backup of an application file on the device
Display information
Description
[ftp]get main.bin main.bin
Download the file used for upgrade
flash:/main.bin has been existing. Overwrite it?
[Y/N]:y
The system prompts whether to overwrite the
existing file.
FTP: 11611272 byte(s) received in 472.515
second(s), 23.00K byte(s)/sec
Download and upgrade of the application file is
finished.
[ftp]put main.bin main.bin
Upload the file from the U200 series device to
the server.
FTP: 4722 byte(s) sent in 0.074 second(s),
63.00Kbyte(s)/sec
Upload and backup of the application file is
finished.
[ftp]quit
Quit FTP client view.
221 Service closing control connection
Close the service control connection.
U200 series device servers as FTP server; PC serves as FTP client
Step1
Set up an FTP upgrade environment.
Figure 6-11
Set up an FTP upgrade environment
z
Connect GigabitEthernet 0/0 on the device to the PC using a crossover Ethernet cable.
z
Configure the IP addresses of the server and client to be on the same network segment and ensure
connectivity between them. In this example, the IP address of GigabitEthernet 0/0 is 192.168.80.10,
and that of the PC is 192.168.80.200.
z
You can use the
ping
command to check whether the connection is successful.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...