![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781024.webp)
2-1
2
Interface Cards and Interface Modules
z
Currently, the U200 series do not support hot-swapping of interface modules.
z
With the hot swapping feature, you can remove an interface module after stopping it with the
remove slot number
command and then replacing the interface module or plugging in a new
interface module as needed without powering off the device.
z
Currently the 2GE and NSQ1GT2UA0 interface modules are not available yet.
2GE Module
Introduction
The 2GE module is a mini high-speed Layer 3 Gigabit Ethernet interface module. The 2GE module
provides two RJ-45 electrical interfaces that support the Layer 3 routing function. Each interface on the
2GE module is available with a link LED and an activity LED for monitoring the link status and data
transmission status. The 2GE module is connected to the processor through a 10-Gbps high-speed bus
and can provide all functions of Layer 3 Ethernet interfaces with high performance.
Front view
Figure 2-1
2GE front view
(1) Captive screw
(2) GE interface 0
(3) Link LED (LINK) of GE interface 0
(4) GE interface 1
(5) Link LED (LINK) of GE interface 1
(6) Data transmit/receive activity LED of GE interface 1
(ACT)
(7) Data transmit/receive activity LED of GE interface 0 (ACT)
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...