5-1
5
Starting and Configuring the UTM Device
You can use only the console port to make initial configuration of a U200 series device.
Setting Up a Configuration Environment
Connecting a U200 Series Device to a Configuration Terminal
For how to connect a U200 series device to the configuration terminal, refer to “Connecting the Console
Cable” in Chapter 4 “Installing the U200 Series Device.“
Setting the Parameters for the Console Terminal
Step1
Create a connection. Select
Start
>
Programs
>
Accessories
>
Communications
>
HyperTerminal
,
and enter a connection name in the
Connection Description
dialog box, as shown below.
Figure 5-1
Create a connection
Step2
Select a connection port. Select a serial port from the
Connect using
drop-down list in the
Connect to
dialog box, as shown below. Be sure to select the serial port to which the console cable is actually
connected.
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...