2-2
LEDs
Table 2-1
Description of the LEDs on the front panel of the 2GE module
LED
Status
Description
Off
No link is present.
LINK
On
A link is present.
Off
No data is being transmitted or received.
ACT
Blinking
Data is being transmitted or received.
Interface specifications
Table 2-2
Interface specifications of 2GE
Item
Description
Connector type
RJ-45
Number of interfaces
2
Interface standards
802.3, 802.3u, 802.3ab
Interface type
Autosensing
When working in the forced mode, Ethernet does not support
MDI/MDIX autosensing.
Frame formats
Ethernet_II
Ethernet_SNAP
Maximum transmission
distance
100 m (328.08 ft.) over category-5 twisted pairs
10 Mbps (autosensing)
Half-/full-duplex auto-negotiation
100 Mbps (autosensing)
Half-/full-duplex auto-negotiation
Rate and negotiation mode
1000 Mbps (autosensing)
Full-duplex auto-negotiation
Interface cable
The 2GE module uses a straight-through or crossover Ethernet cable for connection.
Figure 2-2
Ethernet cable
RJ-45
Connector
A
A
1
8
Connector
RJ-45
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...