![background image](http://html1.mh-extra.com/html/3com/secpath-u200-cs/secpath-u200-cs_installation-manual_440781051.webp)
4-11
Figure 4-12
Connect the AC power cord
(1) AC power socket (100 VAC to 240 VAC, 50/60 Hz, 1.5 A)
(2) AC power connector
(3) AC power cord
Connecting Interface Cables
Connecting the Console Cable
Follow these steps to connect the console cable:
Step1
Select a configuration terminal.
The configuration terminal can be a standard ASCII terminal with an RS232 serial port, or a common
PC.
Step2
Connect the console cable.
Disconnect the power supply to the device. Connect the RJ-45 connector of the console cable to the
console port on the device, and the DB-9 (female) connector to the serial port on the configuration
terminal.
Step3
Power on the device after verifying the connection.
Verify the connection and power on the device. The configuration terminal displays the startup banner
of the UTM device if the connection is correct. For details, see the “Powering on the Device” section in
Chapter 5 “Starting and Configuring the U200 Series Device”.
Take the U200-S for example:
Figure 4-13
Connect the console cable
(1) Console port (CONSOLE)
(2) RJ-45 connector
(3) Console cable
(4) DB-9 (female) connector
(5) Serial port on the configuration terminal
Содержание SECPATH U200-CS
Страница 64: ...5 9 Figure 5 7 Web interface for the U200 M ...