background image

This product can be set up using 

any current web browser, i.e., 

Internet Explorer 6 or Netscape 

Navigator 6.

Network Security

Firewall

5V DC Power Adapter

Before You Begin

 

If you purchased this Network Security Firewall to connect to your high-speed 

Internet connection in a secure manner, you must have either an Ethernet-based 

Cable or DSL modem with an established Internet account from an Internet 

Service Provider (ISP).

Check Your Package Contents

DFL-200 Network Security Firewall

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight Through) Cable

        Using a power

          supply with 

a different voltage 

rating will damage 

this product and void 

its warranty.

If any of the above items are missing, please contact your reseller.

DFL-200

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

specifi cations subject to change without notice. 

specifi cations subject to change without notice. 

specifi cations subject to change without notice. 

specifi cations subject to change without notice. 

Console Cable (RS 232)

Summary of Contents for DFL-200 - Security Appliance















Reviews: