Chapter 32 AP Profile
UAG4100 User’s Guide
318
Radius Server Type
Select
Internal
to use the UAG’s internal authentication database, or
External
to use
an external RADIUS server for authentication.
Primary /
Secondary Radius
Server Activate
Select this to have the UAG use the specified RADIUS server.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for authentication.
Radius Server Port
Enter the port number of the RADIUS server to be used for authentication.
Radius Server
Secret
Enter the shared secret password of the RADIUS server to be used for authentication.
802.1X
Select this to enable 802.1x secure authentication.
Auth. Method
This field is available only when you set the RADIUS server type to
Internal
.
Select an authentication method if you have created any in the
Configuration >
Object > Auth. Method
screen.
Reauthenticatio
n Timer
Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
requests.
The following fields are available if you set
Security Mode
to
wep
.
Idle Timeout
Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Authentication Type Select a WEP authentication method. Choices are
Open
or
Share
key.
Key Length
Select the bit-length of the encryption key to be used in WEP connections.
If you select
WEP-64
:
•
Enter 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for example,
0x11AA22BB33) for each
Key
used.
or
•
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey) for each
Key
used.
If you select
WEP-128
:
•
Enter 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for example,
0x00112233445566778899AABBCC) for each
Key
used.
or
•
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (for
example, MyKey12345678) for each
Key
used.
Key 1~4
Based on your
Key Length
selection, enter the appropriate length hexadecimal or
ASCII key.
The following fields are available if you set
Security Mode
to
wpa
,
wpa2
or
wpa2-mix
.
PSK
Select this option to use a Pre-Shared Key with WPA encryption.
Pre-Shared Key
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
Cipher Type
Select an encryption cipher type from the list.
•
auto
- This automatically chooses the best available cipher based on the cipher in
use by the wireless client that is attempting to make a connection.
•
tkip
- This is the Temporal Key Integrity Protocol encryption method added later to
the WEP encryption protocol to further secure. Not all wireless clients may support
this.
•
aes
- This is the Advanced Encryption Standard encryption method. It is a more
recent development over TKIP and considerably more robust. Not all wireless clients
may support this.
Table 150
Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
DESCRIPTION
