Chapter 4 Installation Setup Wizard
UAG4100 User’s Guide
47
Figure 22
Internet Access: PPPoE Encapsulation
ISP Parameters
• Type the PPPoE
Service Name
from your service provider. PPPoE uses a service name to identify
and reach the PPPoE server. You can use alphanumeric and -_@$./ characters, and it can be up
to 64 characters long.
•
Authentication Type
- Select an authentication protocol for outgoing connection requests.
Options are:
•
CHAP/PAP
- Your UAG accepts either CHAP or PAP when requested by the remote node.
•
CHAP
- Your UAG accepts CHAP only.
•
PAP
- Your UAG accepts PAP only.
•
MSCHAP
- Your UAG accepts MSCHAP only.
•
MSCHAP-V2
- Your UAG accepts MSCHAP-V2 only.
• Type the
User Name
given to you by your ISP. You can use alphanumeric and -_@$./ characters,
and it can be up to 31 characters long.
• Type the
Password
associated with the user name. Use up to 64 ASCII characters except the []
and ?. This field can be blank.
• Select
Nailed-Up
if you do not want the connection to time out. Otherwise, type the
Idle
Timeout
in seconds that elapses before the router automatically disconnects from the PPPoE
server.
WAN IP Address Assignments
•
First WAN Interface
: This is the name of the interface that will connect with your ISP.
•
Zone:
This is the security zone to which this interface and Internet connection will belong.
•
IP Address
: Enter your (static) public IP address.
Auto
displays if you selected
Auto
as the
IP
Address Assignment
in the previous screen.
