ZyXEL Communications UAG4100 User Manual Download

Page: 255 / 477

Chapter 26 Billing

UAG4100 User’s Guide

255

Figure 177

Configuration > Billing > Billing Profile

The following table describes the labels in this screen.

Table 116

Configuration > Billing > Billing Profile

LABEL

DESCRIPTION

Account
Generator
Settings

Button A ~ C

Select a billing profile for each button of the web-based account generator. The buttons
correspond to the buttons on a connected statement printer.

Preview

Click this button to open the

Account Generator

screen, where you can generate a

dynamic guest account and print the account information using a statement printer
connected to the UAG (see

Section 26.3.1 on page 256

for more information).

Billing Profile

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click

Edit

to open a screen where you can modify the

entry’s settings.

Remove

To remove an entry, select it and click

Remove

. The UAG confirms you want to remove it

before doing so.

Activate

To turn on an entry, select it and click

Activate

Inactivate

To turn off an entry, select it and click

Inactivate

This field is a sequential value, and it is not associated with a specific entry.

Status

This icon is lit when the entry is active and dimmed when the entry is inactive.

Name

This field displays the descriptive profile name for this entry.

Time Period

This field displays the duration of the billing period.

Quota (T/U/D)

This field displays how much data in both directions (

otal) or upstream data (

pload) and

downstream data (

ownload) can be transmitted through the WAN interface before the

account expires.

Bandwidth (U/D) This field displays the maximum upstream (

pload) and downstream (

ownload)

bandwidth allowed for the user account in kilobits per second.

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands

ZyXEL Communications UAG4100, User Manual

Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands