ZyXEL Communications Prestige 128IMH, User Manual

Page: 85 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 10-3
2. Edit IP/IPX/Bridge - Press the space bar to change it to Yes and press ENTER to go
to the network layer options menu as seen below. The accompanying table describes the
pertinent fields (Bridge Options).
Figure 10-1 Remote Node Bridging Configuration
Field Description
Dial-On-Broadcast
This field is necessary for the Prestige on the caller side LAN.
When set to Yes, any broadcasts coming from the LAN trigger the
Prestige to make a call to that remote node. If it is set to No, the
Prestige will not make the outgoing call.
Ethernet Addr
Timeout (min)
In this field, enter the time (number of minutes) that you wish the
Prestige to retain the Ethernet Address information in its internal
tables while the connection is down. If this information is retained,
then the Prestige will not have to re-negotiate the protocol and
recompile the tables when the connection is brought back up.
Table 10-1 Remote Node Bridging Configuration Fields
Once you have completed filling in the Network Layer Options Menu, press
ENTER
to
return to menu 11. Press ENTER at the message: ‘Press ENTER to Confirm ... ‘to save
your selections or press
ESC at any time to cancel your selections.
10.3.2. Default Dial-In Setup for Bridge
In
Menu 13 - Default Dial-in Setup
you must fill out the following parameter for
Bridging applications.
Menu 11.3 - Remote Node Network Layer Options
IP Options: IPX Options:
Rem IP Addr: 0.0.0.0 Dial-On-Query= N/A
Rem Subnet Mask= 0.0.0.0 Rem LAN Net #= N/A
My WAN Addr= 0.0.0.0 My WAN Net #= N/A
Single User Account= Yes Hop Count= N/A
Tick Count= N/A
Metric= 2 W/D Spoofing(min)= N/A
Private= No SAP/RIP Timeout(min)= N/A
RIP Direction= Both
Version= RIP-2B Bridge Options:
Dial-On-Broadcast= N/A
Ethernet Addr Timeout(min)=N/A
Enter here to CONFIRM or ESC to CANCEL: