ZyXEL Communications Prestige 128IMH, User Manual

Page: 44 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 5-2
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
calls your ISP using the Primary Phone number first. If the Primary Phone number is
busy or does not answer, the Prestige will call the Secondary Phone number if
available. . The login name/password pair is only for the Prestige to connect to the
ISP’s gateway. When you use TCP/IP applications, e.g., FTP, to access the Internet
from your workstation, you will need a separate login name and password for each
server. The Telco Options: Transfer Type field (which only applies to outgoing calls)
controls the type of connection between your Prestige and the ISP. There are three
choices for this field.
♦
64K - The Prestige places 64Kbps (bits per second) digital data calls.
♦
Leased - The router places leased-line calls. If the router is set up for an ISDN
leased line (that is, if any option but Switch/Switch or Switch/Unused is selected
for the B Channel Usage control in setup menu 2, ISDN Setup and the Transfer
Type control is set to Leased in either setup menu 4, Internet Access Setup or setup
menu 11.1, Remote Node Profile), the router will automatically initialize the
leased-line connection each time it is powered up or the settings in setup menu 2,
4or 11.1 are saved.
♦
Modem – The Prestige will place the call by internal V.90 modem over ISDN
.
Default values are shown on the screen. When you’re finished, press ENTER at the
message: ‘Press ENTER to Confirm ...’ to save your configuration or press ESC at
any time to cancel
.
Figure 5-1 Menu 4 - Internet Access Setup
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Pri Phone #= 1234
Sec Phone #=
My Login= ChangeMe
My Password= ********
Single User Account= Yes
IP Addr= 0.0.0.0
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 300
Press ENTER to Confirm or ESC to Cancel: