ZyXEL Communications Prestige 128IMH, User Manual, Page: 53 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 6-5
For more information on customizing your filter sets, see later chapter on filters. The default
is blank, i.e., no filters defined.
Figure 6-3 Remote Node Filter
Once you have completed filling in Menu 11.1 - Remote Node Profile, press
ENTER
at
the message: ‘Press ENTER to Confirm ...’ to save your configuration or press
ESC
at any
time to cancel.
6.1. Bandwidth on Demand
The Bandwidth on Demand (BOD) feature allows you to bundle both B channels in one
logical connection. The second channel is added and subtracted dynamically according to
traffic demand. The Prestige uses the Bandwidth Allocation Control Protocol (BACP) and
the Multilink Protocol (MP) in implementing bandwidth on demand.
The configuration of bandwidth on demand focuses on the Base Transmission Rate (BTR)
and the Maximum Transmission Rate (MTR). The relationship between BTR and MTR are
shown below:
BTR & MTR Setting No. of
channel(s) used Max No. of
channel(s) used Bandwidth
on demand
BTR = 64, MTR = 64 1 1 Off
BTR = 64, MTR = 128 1 2 On
BTR = 128, MTR = 128 2 2 Off
Table 6-1 BTR v MTR for BOD
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters= 1
device filters=