ZyXEL Communications Prestige 128IMH, User Manual, Page: 26 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 3-2
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
This manual covers initial setup through the SMT interface only. If you wish to use the
Prestige Web Configurator to setup the Prestige for Internet access, please refer to the
enclosed ‘Prestige Quick Start Guide’ and ‘Web Configurator User’s Guide.’
3.2.1. Connect the RS-232 Cable to your Prestige
One 9-25 pin adapter is included in your package. To connect a RS-232 cable, connect the
9-pin end of the cable to the console port on the back panel of the Prestige. Connect the
other end to the RS-232 cable to the serial port (COM1, COM2or any other COM port) of
your computer.
You need to run a ‘Terminal’ program on the computer to access the Prestige’s SMT menus.
Configure the terminal program to use the COM port to which the Prestige is connected.
3.2.2. Connect the ISDN Line to your Prestige
Plug one end of your ISDN telephone line, which is included in your package into the socket
on the rear panel of the Prestige, labeled ‘ISDN’ and follow the instructions below for the
other end.
•
S/T interface - This can only connect to your NT-1 (Network Termination -1) device.
Warning Do not under any circumstances connect an S/T interface directly to the
ISDN wall jack. Only the U-interface model should be connected in this way.
3.2.3. Connect Ethernet to your Prestige
The Prestige supports four 10Base-T Ethernet connections. Each of Prestige’s four
Ethernet ports can be used to connect directly to a Network Adapter Card in your computer.
10Base-T networks use Unshielded Twisted Pair (UTP) cable and RJ-45 connectors that
look like a bigger telephone plug with 8 pins. Two types of gray Ethernet cables come with
the package:
•
Straight through cable (white tag): To connect your Prestige directly to your
computer network card.
•
Crossover cable (red tag): To connect your Prestige to a hub in order to connect
more than four computers.
Warning if one of these cables is accidentally used to connect your Prestige to the
ISDN line, it may damage your Prestige. Please verify the correct cable before
connecting
.