ZyXEL Communications Prestige 128IMH, User Manual, Page: 78 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 9-4
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Field Description
Seed
Router Yes if the Prestige is to act as a seed router. No if there is a NetWare
server providing the network number
Frame Type You can select one or more of these four frame types - 802.2, 802.3,
Ethernet II, SNAP.
IPX
Network #
Provide a unique network number for each frame type enabled, if the
Prestige to act as a seed router .
Once you have completed filling in
menu 3.3
, press
ENTER
to save your selections or
press ESC at any time to cancel your selections.
9.6. LAN-to-LAN Application
A typical LAN-to-LAN application is to use the Prestige to call from a branch office to
headquarters such that all of the stations on the branch office network have access to the
server at the headquarters, as depicted in the following diagram:
Figure 9-1 LAN-to-LAN application
For the branch office, you need to configure a remote node in order to dial out to
headquarters.
9.6.1. Remote Node Setup
Follow the procedure in Chapter 6 to fill the protocol-independent parameters in Menu 11-
Remote Node Profile. For the IPX specific parameters, follow the ensuing instructions. If