ZyXEL Communications Prestige 128IMH, User Manual, Page: 28 / 142

ZyXEL Prestige 128IMH User’s Guide
Page 3-4
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
3.3. Prestige Front Panel
Names and descriptions of the Prestige front panel LED's are listed below:
PWR
ISDN LAN PHONE
TST
LNK B1 B2 1 2
3
4 1 2
Remote Access Router
Figure 3-1 Prestige Front Panel
LED Description
PWR This LED (power) comes on as soon as you connect your Prestige to the
power supply and switch it to the ‘ 1’ (on) position.
TST The TST (Test) LED will blink if the Prestige is functioning properly.
ISDN: LNK This LED indicates that the Prestige has an ISDN line connected to the WAN
interface and it has been successfully initialized.
ISDN: B1
and B2 These LEDs are on if there is an active WAN session on that channel or if
that channel is making or receiving a call.
LAN: 1- 4 These LEDs blink to indicate when there is traffic over the corresponding port
on the built-in Ethernet hub.
PHONE: 1
and 2 This LED indicates the functionality of the POTS port 1 (2) . If there is a
device plugged into this port and the device is in use, this LED should be on.
Table 3-1 front Panel LED Descriptions
3.4. Powering On Your Prestige
With the console port connected and terminal program running, power on your Prestige. The
Prestige performs several internal tests and also does an ISDN line initialization. After this
initialization, the Prestige asks you to press ENTER to continue. If you press ENTER, the
Prestige displays a login screen and asks you to enter the password as shown in below: