ZyXEL Communications Prestige 128IMH, User Manual, Page: 59 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 7-3
Figure 7-1 Example of a Dial-In Server Application
7.4. Default Dial-In Setup
This section covers the default dial-in parameters. The parameters in menu 13 affect
incoming calls from both remote dial-in users and remote nodes before authentication is
completed. Once authentication is completed and if it matches a remote node, the Prestige
will use parameters from that particular remote node. From the main menu, enter
13
to go to
Menu 13 - Default Dial-in Setup. This section describes how to configure the protocol-
independent fields in this menu. For the protocol-dependent fields, please refer to the
appropriate chapters.
The Telco Options: CLID Authen. field sets the CLID authentication parameter for all
incoming calls. There are three choices for this field:
♦
None - No CLID is required.
♦
Required – The caller must provide CLID or the call is disconnected.
♦
Preferred - If the CLID is available, then CLID is used for authentication. Otherwise,
authentication is done during PPP negotiation.
The PPP Options: Recv. Authen. field sets the authentication protocol used for incoming
calls. User names and passwords are configured in the next section (Remote users/Dial-in
Users Setup). Choices for this field are: