ZyXEL Communications Prestige 128IMH, User Manual, Page: 103 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 13-1
13. SNMP
13.1. About SNMP
The Simple Network Management Protocol (SNMP) is a protocol governing network
management and the monitoring of network devices and their functions. The Prestige
supports the utilization of SNMP to regulate the communication that occurs between the
manager station and the agent stations in a network. The Prestige, when connected to the
LAN, acts as an agent station. In this way, the manager station on your LAN can monitor
the Prestige as it would another station on the network. Keep in mind that SNMP is only
available if TCP/IP is configured on your Prestige.
13.2. Configuring Your Prestige For SNMP Support
The following steps describe a simple setup procedure for configuring the SNMP
management.From the main menu, select number
22
to go to Menu 22 - SNMP
Configuration. You are then prompted to enter the information as described below in the
table
Figure 13-1 Menu 22 - SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: