ZyXEL Communications Prestige 128IMH, User Manual, Page: 109 / 142

Prestige 128IMH User’s Guide ZyXEL
¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
Page 15-1
15. Telnet Configuration and
Capabilities
15.1.
About Telnet Configuration
When you first configure your Prestige, it must be done via a computer connected to the
console port. However, once the Prestige has been configured, you can use
telnet
to
configure the device remotely as shown below:
Switched
Digital
Network
Prestige
TA
Telnet form any
remote location
Telnet from any
station on the LAN
Figure 15-1 Telnet Configuration on a TCP/IP Network
In order to configure your Prestige in this way, you need to have assigned an IP Address to
it and have it connected to your network. Please see Chapter 1 for more information on
assigning an IP Address. Once this is configured, any station on the LAN or remote network
that has TCP/IP installed can use
telnet
to connect to the Prestige.
15.2. Telnet Capabilities
15.2.1. Single Administrator
To prevent confusion and discrepancy on the configuration, Prestige only allows one
connection at any time. Prestige also gives priority to the console connection over
telnet
.
If you have already connected to the Prestige via
telnet
, you will be logged out if another