ZyXEL Communications MAX-207HW2, User Manual

Page: 98 / 180

User’s Guide
99
C
H A P T E R
9
The System Configuration
Screens
9.1 Overview
Click ADVANCED (
進階
) > System Configuration (
系統組態
) to set up general
system settings, change the system mode, change the password, configure the
DDNS server settings, and set the current date and time.
9.1.1 What You Can Do in This Chapter
• The Dynamic DNS screen ( Section 9.2 on page 100 ) lets you set up the WiMAX
Modem as a dynamic DNS client.
• The Firmware screen ( Section 9.3 on page 102 ) lets you upload new firmware
to the WiMAX Modem.
• The Configuration screen ( Section 9.4 on page 104 ) lets you back up or
restore the configuration of the WiMAX Modem.
• The Restart screen ( Section 9.5 on page 105 ) lets you restart your WiMAX
Modem from within the web configurator.
9.1.2 What You Need to Know
The following terms and concepts may help as you read through this chapter.
System Name
The System Name is often used for identification purposes. Because some ISPs
check this name you should enter your computer's "Computer Name".
• In Windows 2000: Click Start > Settings > Control Panel and then double-
click the System icon. Select the Network Identification tab and then click
the Properties button. Note the entry for the Computer Name field and enter
it as the System Name.
• In Windows XP: Click Start > My Computer > View system information and
then click the Computer Name tab. Note the entry in the Full computer
name field and enter it as the WiMAX Modem System Name.