ZyXEL Communications MAX-207HW2, User Manual

Page: 131 / 180

Chapter 11 The Phone Screens
User’s Guide
132
The following table describes the labels in this screen.
11.5 Technical Reference
The following section contains additional technical information about the WiMAX
Modem features described in this chapter.
11.5.1 The Flash Key
Flashing means to press the hook for a short period of time (a few hundred
milliseconds) before releasing it. On newer telephones, there should be a "flash"
key (button) that generates the signal electronically. If the flash key is not
available, you can tap (press and immediately release) the hook by hand to
achieve the same effect. However, using the flash key is preferred since the timing
is much more precise. The WiMAX Modem may interpret manual tapping as
hanging up if the duration is too long
You can invoke all the supplementary services by using the flash key.
Table 46 VOICE > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the WiMAX Modem is located. Do not select
Default.
Call Service
Mode Select the mode for supplementary phone services (call hold, call
waiting, call transfer and three-way conference calls) that your VoIP
service provider supports.
• Europe Type - use supplementary phone services in European
mode
• USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact
your VoIP service provider.
Apply (
套用
) Click to save your changes.
Reset (
重設
) Click to restore your previously saved settings.