ZyXEL Communications MAX-207HW2, User Manual

Page: 67 / 180

Chapter 6 The WIFI Configuration Screen
User’s Guide
68
6.2.4 Wireless LAN Advanced Setup
To configure advanced wireless settings, click the Advanced Setup
(
進階模式
)
button in the General screen. The screen appears as shown.
Figure 23 Advanced(
進階
) > WIFI Configuration(WIFI
設定
)
>
General > Advanced
Setup (
進階模式
)
The following table describes the labels in this screen.
Table 21 Advanced(
進階
) > WIFI Configuration(WIFI
設定
)
>
General(
一般
)
>
Advanced Setup (
進階模式
)
LABEL DESCRIPTION
Wireless Advanced Setup
RTS/CTS
Threshold
Enter a value between 0 and 2432.
Fragmentation
Threshold It is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
Preamble Select a preamble type. Choices are Long, Short or Dynamic. The
default setting is Long. See the appendix for more information.
802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices
to associate with the WiMAX Modem.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices
to associate with the WiMAX Modem.
Select Mixed to allow either IEEE 802.11b or IEEE 802.11g compliant
WLAN devices to associate with the WiMAX Modem. The transmission rate
of your WiMAX Modem might be reduced.
Apply (
套用
) Click Apply (
套用
) to save your changes back to the WiMAX Modem.
Cancel (
重設
) Click Cancel (
重設
) to reload the previous configuration for this screen.
Back (
上一步
) Click this to return to the previous screen without saving changes.