ZyXEL Communications MAX-207HW2, User Manual

Page: 81 / 180

Chapter 7 The WAN Configuration Screens
User’s Guide
82
7.3 WiMAX Configuration
Click ADVANCED (
進階
) > WAN Configuration (WAN
設定
) > WiMAX
Configuration to set up the frequencies used by your WiMAX Modem.
In a WiMAX network, a mobile or subscriber station must use a radio frequency
supported by the base station to communicate. When the WiMAX Modem looks for
a connection to a base station, it can search a range of frequencies.
Use Fixed IP
Address (
使用固
定
IP
位址
)
A static IP address is a fixed IP that your ISP gives you. Type your
ISP assigned IP address in the IP Address (IP
位址
) field below.
IP Subnet Mask
(IP
子網路遮罩
)
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are
implementing subnetting.
Gateway IP
Address (
閘道
IP
位址
)
Specify a gateway IP address (supplied by your ISP).
Apply (
套用
) Click to save your changes.
Reset (
重設
) Click to restore your previously saved settings.
Table 25 ADVANCED (
進階
) > WAN Configuration (WAN
設定
) > Internet
Connection > ISP Parameters for Internet Access () (continued)
LABEL DESCRIPTION