ZyXEL Communications MAX-207HW2, User Manual

Page: 100 / 180

Chapter 9 The System Configuration Screens
User’s Guide
101
Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.
Click ADVANCED (
進階
) > System Configuration (
系統組態
) > Dynamic DNS
to set up the WiMAX Modem as a dynamic DNS client.
Figure 40 ADVANCED (
進階
) > System Configuration (
系統組態
) > Dynamic DNS
The following table describes the labels in this screen.
Table 34 ADVANCED (
進階
) > System Configuration (
系統組態
) > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup (
動態
DNS
設定
)
Enable Dynamic
DNS (
啟用動態
DNS)
Select this to use dynamic DNS.
Service
Provider (
服務供
應商
)
Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type (
動態
DNS
類型
)
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Host Name (
主
機名稱
)
Enter the host name. You can specify up to two host names, separated
by a comma (",").
User Name (
使
用者名稱
)
Enter your user name.
Password (
密碼
) Enter the password assigned to you.
Enable Wildcard
Option (
啟用萬用
字元選項
)
Select this to enable the DynDNS Wildcard feature.
Enable offline
option (
啟用離線
選項
)(
只限於自
訂
DNS)
This field is available when CustomDNS (
自訂
DNS) is selected in the
DDNS Type (
動態
DNS
類型
) field. Select this if your Dynamic DNS
service provider redirects traffic to a URL that you can specify while you
are off line. Check with your Dynamic DNS service provider.