Zultys ZIP2x1, User Manual

Page: 142 / 196

132
ZIP2x2 User’s Manual
The time reference for all LEDs is the same, so that the first quarter second for each LED starts
simultaneously. This provides a more uniform display. For example, if the phone receives a call
on call appearance 1 it will flash its LED. If another call comes in 250 ms later, the LED on the
second call appearance button will flash synchronously with the first LED.
When the phone is starting, or if there is a problem with the data connection, the phone “walks”
a pattern on the four call appearances. The patterns are shown in figure B-2.
B.1.1 Message and Encrypt Button
The LED flashes red for 500 ms and is off for 500 ms when you have voice mail. See section 7.1 on
page 71 for details.
The LED is continuously green when the phone is encrypting the speech. See section 7.4.2 on
page 74 for details.
The LED flashes green for 250 ms and red for 250 ms when encryption is rejected.
B.1.2 DND and Forward Button
The LED is continuously red when the phone is in Do Not Disturb mode and rejecting all calls.
See section 7.2 on page 71 for details.
The LED is continuously green when call forwarding is enabled and the phone is forwarding
some or all calls. See section 7.3 on page 72 for details.
Function Pattern Details
Power on; loading Linux operating system Walking red left to right Section 3.2.2 on page 16
Power on; you have pressed a key for one second Walking red right to left Section 3.2.4 on page 17
Unable to establish proper connection to network Walking orange left to right Section 3.2.5.6 on page 21
Figure B-2 Special Patterns for LEDs on Call Appearance Buttons