Zultys ZIP2x1, User Manual

Page: 96 / 196

86
ZIP2x2 User’s Manual
Phone Registered. This is when the phone last registered with the SIP server. The phone needs to
register periodically, typically each hour. The date and time is shown in the format that you have
selected in section 8.4.7 on page 99:
Total Talk Time. This is the total time that the phone has been in the active call state since power
on. It is the summation of time spent on calls that you originated and calls that you received. The
time is reset each time the power is cycled on the phone. The time is shown in days, hours,
minutes, and seconds:
8.3.2 Communications
When you select Menu | Information | Communications , the phone shows the following
displays. You can only view this information. Use the Up and Down keys to scroll through the
various screens. The display on your phone may be different from the screens shown below.
Status of Ethernet Circuits. This data is updated in real time; the display may change as the phone
receives communications.
a. PC signifies the switched port on the ZIP2x2. The ZIP2x1 does not display a PC
parameter.
b. LAN signifies the port that you connect to the switch.
c. –––– signifies there is no connection.
d. 10 signifies a 10 Mb/s connection.
e. 100 signifies a 100 Mb/s connection.
f. H signifies half duplex.
g. F signifies full duplex.
When you display this first screen, the LEDs on the two call buttons display the status of the
Ethernet circuits.
1
a. The LED is solid green to indicate that there is a connection.
b. The LED flashes orange every quarter second to indicate there is activity.
Info | Times
}Registered
01/26/2005 09:23
Info | Times
}Total talk time
0d 35h 12m 14s
Info | Comms
}PC
LAN
---- 100F
1. Do not confuse the use of the LEDs in this mode with the two call appearances. The call appearances all take place over
the circuit labelled LAN.