Zultys ZIP2x1, User Manual

Page: 115 / 196

8. The Menu
105
8.5.2 IP Settings
When you select Menu | Pswd Settings | IP Communications , the display shows the parameters
needed by the phone to communicate with the network. Each parameter is protected and cannot
be changed unless you previously entered your password. After entering your password, you can
modify any of the parameters.
The first screen shows:
This example shows eleven rows, though in practice the display can show only three rows at
once. Use the
Up and Down keys to scroll through the various settings. Press the OK button to
select a parameter.
Type the new value using the keypad. Most parameters require an IP address. To enter the period
(full stop), press the
* key three times. You can enter an FQDN for some parameters by following
the procedure described in section 6.2.5 on page 49.
Press the OK button (to save changes) or the Esc button (to discard changes) to exit the screen.
8.5.2.1 DHCP
When DHCP is enabled, the phone configures network parameters using IP addresses provided
by the DHCP server.
To access this panel, select Menu | Pswd Settings | IP Settings | DHCP .
When you enable DHCP, the DHCP server should provide the following information:
•
IP address for the phone
•
domain name
•
subnet mask
•
address of the default gateway (you can specify this as an IP address or an FQDN)
•
IP address of the DNS server
•
IP address of the secondary DNS server
PSettings | IP
}DHCP
Phone address
Subnet mask
Default gateway
Primary DNS
Secondary DNS
NTP server
TFTP server
TFTP address
DSCP
PSettings | IP
}Enable DHCP
Disable DHCP