Product Manual - ZMORPH FAB
24
8.3 Functionalities
▪
Magnetic detachable covers - fully transparent covers allow for a clear, not obstructed view of
Fabrication processes. For easy cleaning and maintenance of the machine, covers can be removed
thanks to the magnetic mounting system. Covers removal is described in
of this manual
▪ External spool holder - designed for reliable filament unwinding during the 3D printing process.
Mounted on the back of the machine doesn’t obstruct filament path and doesn’t take any additional
space on your desk. Spool holder mounting is described in 9.3 part of this manual.
▪
Closed-Loop System - controls the current position of the toolhead in X and Y axes. Whenever detects
the difference between the real and theoretical position of the toolhead, applies a correction algorithm
to ensure the best quality of Fabrication. It is also used as a protection system in case of severe
positioning problems (like blocked tool-head).
▪ Toolhead changing system - quick and repeatable method for mounting different Zmorph toolheads.
Properly mounted toolhead will ensure high-quality Fabrication whether it is additive or subtractive
manufacturing. Toolhead change is described in
of this manual.
▪ Platform leveling - to ensure proper first layer adhesion your printing bed must be leveled. Zmorph
has developed special software and mechanical solution to make the leveling process easy and
reliable. There are both automatic and manual calibration methods available. Calibration methods are
described in
parts of this manual. Please remember that automatic calibration
is available only for 3D printing toolheads.
▪
Filament change - an additional feature that can be performed during printing with both single and
Dual Extruder Toolhead Toolhead. Allows for easy change of material to achieve either multi-colored or
even multi-material models.
▪ Hibernation - a special software feature that allows to turn off the machine. During hibernation
toolhead position is saved and later restored upon booting machine again.
▪ Filtration system - HEPA and Carbon filtration system, stops most air pollutants released during
machine operation.
▪ Material sensor - ensures the continuity of the material flow in the Single Extruder Toolhead 1.75. When
material shortage is detected the machine stops and pause the printing process and turns on the
filament change mode.
▪
Smart toolheads system - whenevere the machine detects a change in the toolhead cable connection
it will automaticly assist the user in the changing process and detects the correct toolhead.
Machine specification
