Product Manual - ZMORPH FAB
144
When the cutter is in its
local position, go to the ‘SET’
menu and set the local 0,0,0
coordinates by pressing the
‘
SET X = 0’, ‘SET Y = 0
’ and
‘SET Z
= 0’ buttons.
Go back to the main menu
and choose ‘START’. Your
machine will start working.
Z
X
Y
HOME X
HOME Z
HOME Y
SET Y = 0
SET Z = 0
BACK
MOVE
SET X = 0
14.6 Laser Toolhead safety rules
Instructions for preparing the workplace and how to safely operate the Laser Toolhead on Zmorph Fab.
The Laser Toolhead supplied with the Zmorph Fab machine is a 2.8 Watts class 4 laser with emitted
wavelength of 450nm.
These types of lasers are extremely dangerous, they emit visible or invisible radiation and they cause
irradiation greater than allowed. Diffuse radiation is dangerous to eyes and skin. Potential hazards are
materials evaporated from the surfaces of illuminated objects. Depending on the material used, toxic
fumes may affect the user’s respiratory tract and eyes.
Workstation
▪ Avoid using any reflective surface in the room in which the laser is used (eg mirrors, equipment with
shiny metal-chromed, nickel-plated, aluminized - or glass parts),
▪
It is necessary to secure the room in which the Zmorph machine with Laser Toolhead is located and
not working before an unprofessional start-up (the key to the room should only be held by a person
authorized to operate the laser),
▪
It is necessary to mark the entrance door to the room where the device with the attached Laser
Toolhead is used with an appropriate laser radiation warning sign,
Laser workflow
CALIBRATE
SETTINGS
CHOOSE
FILE
START
BACK
