Product Manual - ZMORPH FAB
102
12.13 Editing parameters during printing
Functions allowing to change parameters during the printing process:
3D printing workflow
Choose ‘SETTINGS’.
The ‘Print Speed’ part allows
you to change the print
speed. Select the plus sign to
increase or the minus sign to
decrease the speed from 5%
to 300% of the initial speed.
The ‘Fan Speed’ section allows
you to change the settings of
the fan, the ‘ON’ option turns
on the fan at 100% and the
‘OFF
’ function turns off the
fan. After selecting the ‘AUTO’
option, the speed of the fan is
set according to the G-code.
Choose ‘MORE’.
The Heat function allows you
to change the temperature of
the extruder and the table.
Choose ‘HEAT’ and tap the
needed temperature on
keyboard, then OK.
The ‘CHANGE FILAMENT’
function allows you to change
the filament during the
printout and is described
in the chapter ‘Filament
replacement during printing’.
PAUSE
ABORT
SETTINGS
ON
OFF
AUTO
FAN SPEED
PRINT SPEED
BACK
MORE
PRINT SPEED
ON
OFF
AUTO
FAN SPEED
BACK
HEAT
CHANGE
FILAMENT
SLEEP
MORE SETTINGS
BACK
LESS
PRINT SPEED
ON
OFF
AUTO
FAN SPEED
BACK
HEAT
CHANGE
FILAMENT
SLEEP
MORE SETTINGS
BACK
LESS
example.gcode
progress 20% 0h34m elapsed
