Product Manual - ZMORPH FAB
56
NOTE: The ‘PREHEAT PLA’ button will heat the nozzle to 200°C the ‘PREHEAT ABS’ and ‘PREHEAT PET’ to 240°C
3D printing workflow
Take off the front cover.
Straighten the tip of filament
up or cut its end
Wait till extruder reaches the
proper temperature. The yellow
‘TEMPERATURES’ sign will change
colour from yellow to green.
Insert the filament into the
left side guide hole on top of
the extruder.
Tap the ‘LOAD/UNLOAD’
menu.
Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow
with LEFT description to do that.
Push the filament down
until you feel it has been
grabbed by the extruder
drive gear.
Insert the second filament
into the right side
guide hole on top of the
extruder.
Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow with
RIGHT description to do that
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
LEFT
RIGHT
ALL
LOAD/UNLOAD
TEMPERATURES
PARK
TOOL
BACK
LEFT
RIGHT
ALL
LOAD/UNLOAD
TEMPERATURES
PARK
TOOL
BACK
NOTE
80mm
80mm
80mm
80mm
80mm
80mm
