Product Manual - ZMORPH FAB
106
The printer will ask you to
confirm your decision. To do
this, choose ‘YES’. If you do
not want the printer to go into
hibernate mode choose ‘NO’.
Wait for the extruder to finish
printing and stop at the right
place.
The printer is ready to
disconnect the power supply
safely when prompted.
Switch the printer on to
resume operation.
The printer will ask you to
confirm that you want to
continue the stopped printout.
To do so, choose ‘YES’. If
you do not want to continue
printing choose ‘NO’.
3D printing workflow
12.18 Hibernation
Choose ‘SETTINGS’.
Choose ‘MORE’.
Choose ‘SLEEP’.
This option allows you to safely pause printing, with the option to resume it if you need to disconnect the
printer from the power supply. Hibernation should not be used to pause printer operation for a long time
due to the cooling of the table and extruder.
PAUSE
ABORT
SETTINGS
ON
OFF
AUTO
FAN SPEED
PRINT SPEED
BACK
MORE
example.gcode
progress 20% 0h34m elapsed
HEAT
CHANGE
FILAMENT
SLEEP
MORE SETTINGS
BACK
LESS
NO
YES
BACK
Would you like
to hibernate the printer
Please wait while
the printer is hibernating
It’s now safe
to turn off the printer
NO
YES
BACK
Would you like
to resume the last print?
NOTE
Once the extruder and
the table have reached
the correct temperature,
the printout will start au-
tomatically from where it
was stopped.
