Product Manual - ZMORPH FAB
59
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
Tap the upper RIGHT arrow
on the screen to remove 80
mm of the filament. At first,
extruder will load 40 mm to
prevent clogging. Repeat if
needed.
Third menu named ALL maintain both filaments at the same
time. Tap down arrow with ALL description to feed both
filaments.
By tapping the button showing ‘80 mm’ you can change the
amount of extruded filament to 15 or 5 mm.
12.5 Material exchanging
Single Extruder Toolhead 1.75
To preheat the extruder, follow these steps.
Choose ‘MAINTENANCE’
from the LCD touchscreen
menu.
Choose ‘LOAD FILAMENT’.
Choose ‘PARK TOOL’, wait for
the machine to position the
toolhead. When done, choose
‘PLA’ to preheat the material.
3D printing workflow
NOTE
LEFT
RIGHT
ALL
LOAD/UNLOAD
TEMPERATURES
PARK
TOOL
BACK
LEFT
RIGHT
ALL
LOAD/UNLOAD
TEMPERATURES
PARK
TOOL
BACK
NEW JOB
MAINTENANCE
LOAD
FILAMENT
CHANGE
TOOL
CALIBRATE
3D PRINTING
BACK
MORE
LOAD/UNLOAD
PLA
ABS
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
PARK
TOOL
BACK
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
Wait till the extruder reaches
the proper temperature. The
yellow ‘TEMPERATURES’ sign
will change colour from yellow
to green.
Tap the LOAD/UNLOAD
menu.
Tap the upper arrow on the
screen to remove 80 mm of the
filament. At first, extruder will
load 40 mm to prevent clogging.
Repeat if needed.
80mm
80mm
80mm
80mm
80mm
80mm
