Product Manual - ZMORPH FAB
12
Warranty and liability
3. Manufacturer’s warranty
and liability
3.1 Scope of the warranty
Zmorph Fab Multitool 3D Printer is designed to be modular and easy to service. In case of technical difficulty
with any parts, it can be easily removed and shipped to manufacturer for maintenance.
3.1.1
Guarantor is only liable for the physical defects resulting from the inherent causes in the sold product.
3.1.2
Duration of the warranty starts at the date of purchase of the product by the initial Buyer. The Date of
Purchase is the date specified in the sales invoice. The warranty period of the repaired product is extended
by the time which was required to repair the product (which includes the time from the delivery of the
defective product with the complete warranty claim until the date of returning the repaired product to the
Customer).
3.1.3
Warranty does not cover defects resulting from other causes than indicated in clause 3.1.2, especially
any defects resulting from:
a) improper use or application of the product;
b) improper product selection for the existing installation site conditions;
c) improper or inconsistent with User Guide installation (including improper connection to the main
power supply), maintenance, storage or transport;
d) mechanical, chemical or thermal damages;
e) deliberate product damages;
f) damages ensuing as a result of non-original or inconsistent with Zmorph’s recommendations or
with the User Guide product use;
g) random events;
h) factors being result of major force, random events or any other external factors;
i) use of non-original parts or consumables;
j) modifications, repair attempts, interference in the product carried out by any other person than
Zmorph representative or other representative authorized by Zmorph to carry out any of the above
mentioned actions;
k) continued usage of the product despite occurrences indicating an obvious defect;
l) improper transport methods provided by the Customer;
