Product Manual - ZMORPH FAB
126
NOTE
NOTE
NOTE
The information on the Z axis height is stored in the motherboard internal memory. That is guided
by the fact that this value is not easy to change manually by the user unlike the X and Y axes
Don’t home the Z axis when the milling cutter is in the spindle and when there is material on the
CNC worktable. This will damage the milling cutter and might disarrange the Z axis motors.
In most cases the local starting position will be the material surface left, front corner.
Toggle the distance button for better control over the cutter.
Press the ‘HOME X’ and ‘HOME Y’ buttons. Watch out for your cutter not
to hit the material on the worktable.
SET X = 0
SET Y = 0
SET Z = 0
HOME X
HOME Z
HOME Y
Z
X
Y
BACK
MOVE
SET X = 0
SET Y = 0
SET Z = 0
HOME X
HOME Z
HOME Y
Z
X
Y
BACK
MOVE
Go back to ‘MOVE’ menu
Using provided arrow buttons, move the spindle to the FRONT-LEFT
corner of material.
X
Y
Z
MOVE Z
MOVE X Y
BACK
SET
CNC milling workflow
1mm
10mm
70.00
30.00
20.00
