Product Manual - ZMORPH FAB
29
Setting up Zmorph Fab
9.2 Safety features removal
9.3 Assembling the spool holder
After the machine has been set up at the target workplace, before it is put into operation for the first time,
remove the safety band from the toolhead and the protective foam from the worktable.
For a better experience with the Zmorph Fab machine, it is recommended to assemble the dedicated spool holder.
Open the front cover of the
machine to the point where it
touches with the back cover.
Magnetic latches will keep
the cover open.
Remove the protective tool
band.
Gently remove the work table
protection foams.
Prepare the spool holder
components and a 2.5 mm
Allen key.
Look at the back of Zmorph
Fab. Spool holder attachment
screws are placed at the top
of the frame and highlighted
on the picture.
Loosen the frame screws with
a 2.5 mm Allen key.
