Product Manual - ZMORPH FAB
124
CNC milling workflow
13.6 CNC milling file starting (with calibration)
Enter the ‘NEW JOB’ menu.
Go to the ‘CHOOSE FILE’
section.
Files uploaded to the internal
SD card are located in the
‘INTERNAL’ tab, files uploaded
to the SD card are located in
the ‘EXTERNAL’ tab.
Select the prepared G-code
file.
If the prepared file or folder
is not visible on the list
press the up/down arrow
buttons to navigate through
the file list.
Exiting the folder is done by
selecting the folder icon.
After uploading the file to an internal card or inserting an external SD card with the prepared file:
NOTE
If the user inserted the external SD card the screen should jump forward to the ‘CHOOSE FILE’
section screen on the ‘EXTERNAL’ directory.
If there was no previously chosen file, after pressing on the ‘
NEW JOB’ menu the screen will go
directly to the ‘CHOOSE FILE’ section.
NEW JOB
MAINTENANCE
CANCEL
NEXT
EXTERNAL
INTERNAL
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START
BACK
CANCEL
NEXT
EXTERNAL
INTERNAL
CANCEL
NEXT
EXTERNAL
INTERNAL
CANCEL
NEXT
EXTERNAL
INTERNAL
example.gcode
example.gcode
example.gcode
example.gcode
