5. Selecting the Off option forces the active trip levels and sensitivity codes to their
Default value regardless of the time.
23.8How To Enable And Disable A Single Point (Stand-Alone Panel)
1. Enter the user menu as described in section 23.
2. Press 3 to select option 3. The screen will display the current disabled devices:
DISABLEMENT SUMMARY
0003 POINTS,000 INPS
SOUNDERS, PRINTER
00 ZNS,>=MENU,<=EXIT
This example shows no zones, 3 points, no inputs; all sounders and the printer are
disabled.
3. Press enter to continue. The following screen will be displayed:
EN/DIS:1=POINTS
2=ZONES, 3=PRINTER
4=SOUNDERS 5=INPUTS
SELECT 1..5, <=EXIT
4. Press 1. The following screen will be displayed:
ENABLE/DISABLE POINT
1=SINGLE, 2=RANGE
3=VIEW, 4=ENABLE ALL
SELECT 1..4, <=EXIT
5. To disable a single point press 1. The following screen will be displayed:
SINGLE POINT EN/DIS
LOOP? 1
>=ENTER, <=BACK/EXIT
6. Change the loop number and press enter to continue.
SINGLE POINT EN/DIS
LOOP 01
POINT? 001
>=ENTER, <=BACK
7. Enter the point number and press enter. The next screen displays the current
device disablement status. The following screen shows the device is enabled with
the option to disable.
SINGLE POINT EN/DIS
1:023 ENABLED
1=DISABLE POINT
SELECT 1, <=EXIT
Page 52 of 111
02/10/03
