2. Select 3: Network Setup; 3: Print Responses
PRINT NET.RESPONSES
1=DISPLAY,2=PRINTER
3=MEMORY, 4=CONTROLS
5=SPECIAL <=EXIT
3. Select 1: Display
4. The panel will proceed to prepare a report of the panel’s network display responses,
then will print it out.
8. Press < to exit the network responses menu.
24.31How To Change The Class Change Modes
The panel can drive either channel 0 (steady) or channel 1 (pulsing) of loop sounders
in response to the class-change input.
24.31.1To change the output bits, enter the engineers menu and select:
1:Panel set-up; 2:General Config; >=next page ; 2:Class Change Modes
1. Press 1 to toggle the pulsed or steady mode.
2. Press > to enter the new mode or < to escape without changing class change mode.
Note: Printing the Printer, Memory, Control and Special Function Responses
follows a similar sequence.
Page 100 of 111
02/10/03
