Written by: A.C. Amended by GG
Checked by: JBJ
Document Number: USDISC Rev.: 3
Page 21 of 47
19/07/2004
RANGE POINTS EN/DIS
PANEL? 001
>=ENTER, <=BACK/EXIT
4. Enter the panel number and press enter to continue.
PAN001 POINTS EN/DIS
LOOP? 1
>=ENTER, <=BACK/EXIT
5. Enter the loop number and press enter to continue.
PAN001 POINTS EN/DIS
LOOP 01
POINT? 001
>=ENTER, <=BACK
6. Enter the number of the first point and press enter.
PAN001 POINTS EN/DIS
LOOP 01
POINTS 015 TO 015
>=ENTER, <=BACK
7. Enter the number of the second point and press enter.
PAN001 POINTS EN/DIS
1:015-030
1=ENABLE, 2=DISABLE
SELECT 1..2, <=EXIT
8. Choose the option required:
i) To enable the range of points displayed press 1
ii) To disable the range of points press 2
iii) To exit without making any changes press escape
If the local panel number was entered then the appropriate local points will be
enabled/disabled.
If another panel number was entered then a suitable command will be sent via
the network to the appropriate panel.
The screen will display the previous page:
ENABLE/DISABLE POINT
1=SINGLE, 2=RANGE
3=VIEW, 4=ENABLE ALL
SELECT 1..4, <=EXIT
9. Press escape to exit the menu one level at a time.
6.13 How To View Disabled Points
1. Enter the disablement menu as described in section 1.1.
