SILENCE / RESOUND
ALARMS
SILENCE
BUZZER
OVERRIDE
DELAY
1
2
3
4
5
6
<
>
MAINTENANCE
GENERAL
DISABLEMENT
Page 47 of 111
02/10/03
Switch to 1 to enable controls
(enter level 2). Override delay
operates with switch in either
position.
Constant to indicate delay is active,
pulsing when delay running
Not used
Indicates power supply
active (mains or battery)
Pulses when a new fire is
active, continuous when all
fires have been silenced
Pre-alarm active
Indicates internal fault
Pulses if new fault detected,
continuous if all active faults
have been silenced
Pulses if fault detected with either
alarm circuit or any loop alarm
controller. Continuous for alarm circuit
disabled conditions
Resets all fire and fault
indications. (Fire conditions
must be silenced first)
Tests all indications and internal
buzzer
Silences the internal buzzer for
any condition
Used within access menu to delete
items and escape from menus
Enters text in the access menus
User controls. Only
override delay is
available without
operating the access
controls keyswitch
User indications
20 character by 4 line
LCD display. Back-lit
when event present or
Access controls switch
ON.
Operates all sounder circuits
continuously
Displays the next message at the
current event level
Activates all alarm outputs
when pressed. Alarms silenced
when released
Enters the user menu system
for access to further level 2
and level 3. Increments
digits in user menu number
entry
Overrides the delay to outputs
function and immediately actions
the outputs
Indicates some part of the system has
been disabled
Continuous when the buzzer has been
silenced
Continuous to indicate some part of the
system is in test mode
Pulses to indicate another message is available
for viewing with the scroll events button
Decrements digits in user
menu number entry
Silences the internal buzzer for
any condition
Silences sounding devices for fire
events. If already silenced the
previous alarm condition is re-
activated
