Written by: A.C. Amended by GG
Checked by: JBJ
Document Number: USDISC Rev.: 3
Page 34 of 47
19/07/2004
5. Enter the first input number and press enter to continue.
PAN001 INPUTS EN/DIS
INPUTS 001 TO ? 001
>=ENTER, <=BACK/EXIT
6. Enter the number of the second input and press enter.
PAN001 INPUTS EN/DIS
INPUTS 001 TO 002
1=ENABLE, 2=DISABLE
SELECT 1..2, <=EXIT
7. Choose the option required:
I) To enable the range of inputs displayed press 1
ii) To disable the range of inputs press 2
iii) To exit without making any changes press escape
If the local panel number was entered then the appropriate local inputs will be
enabled/disabled.
If another panel number was entered then a suitable command will be sent via
the network to the appropriate panel.
The screen will display the previous page:
INPUT DISABLEMENT
1=SINGLE, 2=RANGE
3=VIEW
SELECT 1..3, <=EXIT
8. Press escape to exit the menu one level at a time.
6.29 How To View Disabled Expansion Board Inputs
1. Enter the disablement menu as described in section 1.1.
EN/DIS:1=POINTS
2=ZONES, 3=PRINTER
4=SOUNDERS 5=INPUTS
6=OUTPUTS, <=EXIT
2. Press 5. The following screen will be displayed:
INPUT DISABLEMENT
1=SINGLE, 2=RANGE
3=VIEW
SELECT 1..3, <=EXIT
3. To view the disabled inputs press 3. The following screen will be displayed:
DISABLED INPUTS
PREPARING REPORT
PLEASE WAIT
<=EXIT
