Zero 88 ILLUSION 120, Operating Manual

Page: 62 / 106

The Submaster Screen
The Submaster screen is used in the
programming, editing and playback of
submasters.
Press the SCREEN FUNCTION key F3
or select the Submaster screen
selection button using the mouse to
display the Submaster screen on the
monitor.
The SCREEN FUNCTION key F7 or
the soft button on the Submaster
screen is used to toggle between the
two display modes of
All Submasters
and
Active Submasters
.
The SCREEN FUNCTION key F8 or
the soft button on the Submaster
screen is used to display a drop down
menu for items in the Special column
of the Submaster screen.
The PAGE UP and PAGE DOWN
buttons or the soft buttons on the
Submaster Screen are used to change
page. The current page is indicated by
the seven segment display on the front
panel.
The two display modes are described
in the following sections.
All Submasters Display
This display mode is used primarily
when ‘programming’ or editing the
submasters.
A table containing the data for one of
the nine (twenty) pages of submasters
is displayed on the screen.
The page number is indicated by the
seven segment display.
Both unprogrammed and programmed
submasters are shown in the table.
A yellow highlight bar is displayed on
the submaster which is currently
selected on the monitor screen.
Active Submasters Display
This display mode is used primarily
when ‘running’ the show and playing
back data on the submasters.
The table indicates which of the 108
(240) submasters are currently active
on the 12 physical submasters on the
front panel.
It also shows which memories or
channel data are loaded onto these
submasters, if any.
There is always an active page, which
is indicated by the seven segment
display on the front panel.
Where page overlay is in operation (i.e.
the output from a submaster is not
from the current page), the submaster
number field for the appropriate
submaster(s) is highlighted in orange.
Example - Set the submaster page to
page 1 and raise the first 4 submaster
faders to full. Change to page 2. The
submaster screen will show the
following submasters:
1.1, 1.2, 1.3, 1.4, 2.5, 2.6, 2.7, 2.8, 2.9,
2.10, 2.11, 2.12.
A yellow highlight bar is displayed on
the submaster which is currently
selected on the monitor screen.
6 - 2
Submasters
Figure 6 - 2: Submaster Screen - All Submasters Display