Copying Memories
The copy function is used to copy a
complete memory from one location to
another.
The function performed (Copy To or
Copy From) is dependent on the status
of the selected memory as described in
the following sections.
If there is not sufficient memory
available to perform the copy operation
a warning message is displayed on the
screen.
Copying to a Memory
1.
Select an unprogrammed memory
2.
Press the COPY button on the
front panel, or right click and
select the Copy option from the
menu. A window is displayed
requesting a memory number to
copy from.
3.
Enter the source memory number
in the field provided and then
select the OK button in the
window.
If a valid source memory is
entered, the source memory will
be copied into the currently
selected memory and the Copy
window closed.
If the source memory number
specified is invalid, or the source
memory is unprogrammed, an
error message is displayed.
Copying from a Memory
1.
Select a programmed memory.
2.
Press the COPY button on the
front panel, or right click and
select the Copy option from the
menu. A window is displayed
requesting a memory number to
copy to.
3.
Enter the destination memory
number in the field provided, then
select the OK button in the
window.
If the destination memory is
unprogrammed, the currently
selected memory is copied into
the destination memory and the
copy window is closed.
If the destination memory is
programmed, a warning message
is displayed. Select overwrite to
overwrite the destination memory.
5 - 16
Memories
Figure 5 - 15: Copy Memory Window
Summary of Contents for ILLUSION 120
