Zero 88 ILLUSION 120, Operating Manual

Page: 26 / 106

Memory Defaults
•
TRIGGER
The memory can be triggered
automatically or by the GO button.
•
DELAY DOWN
The delay before the current memory
begins to fade out.
•
FADE DOWN
The time for the current memory to
fade out.
•
DELAY UP
The delay before the next memory
begins to fade in.
•
FADE UP
The time for the next memory to fade
in.
•
DWELL
The hold time from the end of the
transition to the end of the memory.
•
CHASE SPEED
The default chase speed (1 - 600 beats
per minute).
•
RESPONSE
The default speed (response) for
sound to light and ripplesound
memories (1-16).
Submaster Defaults
•
FADE UP
The default time to fade up the channel
or memory data on a submaster, when
it is moved through its full travel.
•
FADE DOWN
The default time to fade down the
channel or memory data on a
submaster, when it is moved through
its full travel.
•
ATTRIBUTE TRIGGER LEVEL
The default value at which attribute
channels are triggered.
•
CHASE TRIGGER
The default chase trigger (Transfer,
Fader Level or Flash Button).
•
CHASE TRIGGER LEVEL
The default chase trigger level.
•
MACRO TRIGGER LEVEL
The default macro trigger level.
Playback X Defaults
•
TIME INPUT
Defines the time input mode for
Playback X (Real, SMPTE or MIDI).
•
TIME DISPLAY
Number of frames/sec (24,25 or 30)
when Time Input is SMPTE or MIDI.
Playback A/B Defaults
•
PLAYBACK A/B MODE
Determines whether Playback A/B
operates in Manual or Auto Load
mode.
•
PLAYBACK A ATTRIBUTE
TRIGGER LEVEL
The level at which attribute channels
are triggered when the A MASTER
fader is raised to output the loaded
memory.
•
PLAYBACK B ATTRIBUTE
TRIGGER LEVEL
The level at which attribute channels
are triggered when the B MASTER
fader is raised to output the loaded
memory.
Load Default Setup
The Default Setup is all desk channels
assigned to Brightness, included in
memories and patched to their
corresponding DMX channel at a
proportion of 100%.
Select
Load Default Setup
from the
Desk Setup options. A warning
message is dispayed on the monitor
screen. Select
Load
to confirm the
operation.
When the default setup is loaded, all
existing memory and submaster data is
cleared.
3 - 8
Setup
Figure 3 - 8: Desk Setup - Desk Defaults - Memory