Zero 88 ILLUSION 120, Operating Manual

Page: 90 / 106

Clear Memories
This option clears all the programmed
memories in the desk, leaving them
unprogrammed.
If any memories have been transferred
onto submasters or A/B masters, then
the relevant submasters and A/B
masters are also cleared automatically.
Select the
Clear Memories
option from
the Super User screen. A confirmation
window is displayed.
Select the
OK
button in the window to
confirm the operation.
Renumber Memories
This option renumbers all the user
programmed memories according to
the parameters specified.
Example - If the programmed
memories are renumbered by
specifying a start number of 10 and
increment 5, the new memory numbers
will be 10,15, 20 etc.
Select the
Renumber Memories
option
from the Super User screen. A
Renumber Memories Window is
displayed.
Enter the start memory number in the
field provided.
Select the required increment (0.1, 0.2,
0.5, 1, 2, 5 or 10).
Select the
Renumber
button in the
window.
A popup window is displayed indicating
that the renumbering was successful,
or that the memories could not be
renumbered with the parameters
specified.
Memories transferred onto submasters
are automatically renumbered.
Clear Submasters
This option clears the data from all the
programmed submasters in the desk,
leaving them unprogrammed.
Select the
Clear Submasters
option
from the Super User screen. A
confirmation window is displayed.
Select the
OK
button in the window to
confirm the operation.
Clear Auxiliary Controls
This option clears all the auxiliary
controls in the desk, leaving them
unprogrammed.
Select the
Clear Auxiliary Controls
option from the Super User screen. A
confirmation window is displayed.
Select the
OK
button in the window to
confirm the operation.
10 - 2
Super User
Figure 10 - 2: Renumber Memories Window