Zero 88 ILLUSION 120, Operating Manual

Page: 25 / 106

Desk Setup
Select
Desk Setup
from the Setup
options. The Desk Setup Window is
displayed on the monitor screen and
contains the following options:
Desk Defaults
Load Default Setup
Assign Channels
Autopatch Out
Autopatch In (240 only)
Clear DMX Patch
Setup Auxiliary Buttons
Setup Remote Switches
Set Tracking Mode
Each of these options is described in
the following sections.
Desk Defaults
The Desk Defaults section allows the
desk to be set up to your own personal
preferences.
Select
Desk Defaults
from the Desk
Setup options. The following options
are displayed:
General
Memory
Submaster
Playback X
Playback A/B
Select the required option, then use
the cursor keys or mouse to move to
the field to be edited. Adjust the value
as required. A summary of each of the
desk default fields is given in the
following sections.
General Defaults
•
BEEP
When set to
On
, the desk provides
confirmation and warning beeps.
•
BEEP VOLUME
Sets the beep volume level.
•
BEEP TEST
Generates a beep at current volume.
•
ENTER CHANNEL VALUE AS
The format for entering channel data in
the CDW (see chapter 11 for details).
•
ENTER AUXILIARY VALUE AS
The format for entering auxiliary data.
(Percentage or DMX).
•
ON BUTTON LEVEL
Sets the default ON button value.
•
REMOTE SWITCHES
Enables or disables remote switches.
•
CHANNEL DATA WINDOW
Selects bargraphs or numerics only.
•
CHANNEL DATA DISPLAY
Sets the Channel Data Display to the
required height.
•
RECOVERY
Enables or disables recovery mode.
•
DMX IN
Enables or disables DMX In.
NOTES
Beeps
A long warning beep is sounded whenever an
error/warning message is displayed on the
monitor screen.
A short confirmation beep is sounded when
memory or other data is specifically saved.
Recovery Mode
The Recovery Mode determines how the desk
performs when switched off and back on,
either deliberately or accidently.
Recovery Disabled - The desk will come up
showing the Memories Screen, the highlight
bar on memory zero. There are no outputs
(unless any submasters containing data are
raised). Page 1 of the submasters is displayed
with no page overlays in operation.
Recovery Enabled - The desk will come up
showing the screen which was on display
when the desk was switched off. The previous
position in the Memory Stack is reinstated, ie
the current and next memory are as before.
Any chase memories running are restarted
from step 1. The submasters come up on the
page that they were on, complete with any
overlays that were in operation at the time.
DMX In
The DMX In option is only displayed on the
Illusion 240, or an Illusion 120 with a SMPTE
& DMX In upgrade kit fitted.
3 - 7
Setup
Figure 3 - 7: Desk Setup - Desk Defaults - General