Installing an OverDrive Processor
Notice: To avoid damaging the CPU module, you must remove the
module from the system board before installing or removing an
upgrade processor.
Note: Only the 486DX/33 modules are upgradeable.
Long 486DX/33 CPU Module:
1.
Power off the system and remove the covers as described
earlier in this chapter.
2.
Remove the CPU module from the system board and place it
on an antistatic foam pad.
Notice: Observe static precautions. Use an antistatic wrist strap.
3.
Remove the new processor from its protective packaging.
4.
Align the notched corner of the new processor with pin 1 on
the socket and lower the processor into place.
04/APRIL/93 – 595-5484-UU
99
4-45
Upgrades and Options
