Remapping Onboard Video Controller Addresses
Jumper E0722 allows you to remap access to the I/O registers for
the super VGA video controller. The default base address is
03C3H. To change the starting address of the registers to 46E8H,
perform the following procedure:
1.
Power off the system and remove the covers as described in
the Upgrades and Options chapter.
2.
Move the video controller I/O address jumper, E0722, to
pins 2 and 3 to change the starting address of the I/O
registers to 46E8H.
3.
Replace the covers and power on the system.
04/APRIL/93 – 595-5484-UU
47
3-25
Configuring Your System
